Set of 3 replacement filters (RO+PAC+CF) for BEM LINA and IDA water filters

CF replacement filter for BEM Lina and BEM Ida water filters - third purification stage Final purification based on pressed activated carbon without mineral fillers. Improves the taste of the water, removes residual odours and stabilizes the quality of the drinking water after the membrane. Properties: Contains no mineral additives and no mineralizing components. Used to purify water after the reverse osmosis membrane. Improves the taste of the water, removes residual odors and foreign tastes. Stabilizes the quality of drinking water after depth filtration and makes the taste softer and more neutral. Ø 6.8 x 29.2 cm Weight: 0.48 kg Replacement interval: Replace the filter cartridge every 6-12 months (depending on the water quality) Please note: Instead of the standard carbon after-filter, an SR remineralization filter (item no. 70200605) can be installed in the system. It performs the same post-cleaning functions, but additionally enriches the water with 18 natural minerals (calcium, magnesium, potassium, etc.) and thus ensures a soft and balanced composition.Important! The post-filter does not clean the water of impurities - it only affects the taste. If worn, it does not protect against odors. The service life depends on the quality of the initial water and the consumption volume. A delayed filter change can lead to a deterioration in the taste of the water. Recommendations for filter change according to TDS value: TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (CF/SR) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

PAC replacement filter for BEM Lina and BEM Ida water filters - First cleaning stage Features: Foldable combined polypropylene/cotton cartridge with activated carbon Removal of impurities such as sediment, rust, sand, suspended particles Reduces chlorine content, eliminates odors and foreign tastes. Replacement interval: Replace the filter cartridge every 6-12 months (depending on the water quality)Important! The service life depends on the quality of the tap water and the consumption volume. Delayed replacement can lead to a reduction in the efficiency of the entire system and damage to the membrane. The use of filters with hot water (>38°C) is prohibited, as this destroys the structure of the membrane and the activated carbon Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (CF/SR) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

RO replacement filter for BEM Lina and BEM Ida water filters - second purification stage Features: Main element of reverse osmosis filtration. Ensures deep purification of the water at molecular level. The membrane with a pore size of 0.0001 μm retains up to 99 % of dissolved substances. Removes hardness salts, heavy metals, bacteria, impurities and dissolved substances (TDS). Replacement interval: Replace the filter cartridge every 12-24 months (depending on the water quality) Important! The service life of the cartridges depends on the quality of the source water and the volume used. Delayed replacement of the pre-filter (1st stage, PAC) can impair the function of the reverse osmosis membrane (RO). Ignoring the membrane change can lead to impurities entering the drinking water and to a reduction in the efficiency and functionality of the appliance. Recommendations for filter change according to TDS value:         TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (CF/SR) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Set of 3 replacement filters (RO+PAC+SR) for BEM LINA and IDA water filters Complete set of three filter elements for multi-stage water treatment: pre-filtration, deep cleaning and final taste improvement. 1st stage - PAC (pre-filter): Combined filter made of polypropylene/cotton and activated carbon. Removes / reduces: Sand, rust and deposits mechanical and suspended particles residual chlorine Unpleasant odors and flavors Change interval: 6-12 months (depending on the quality of the tap water, e.g. water hardness) 2nd stage - RO (reverse osmosis): Membrane filter for deep water purification. Enables filtration at molecular level. Filtration fineness: up to 0.0001 µm Removes / reduces: dissolved substances (TDS) Hardness salts heavy metals Organic and inorganic impurities Change interval: up to 12 months (depending on the quality of the tap water, e.g. water hardness) 3rd stage - SR (remineralization): Post-filter with remineralization function. Improves the taste of the water and enriches it with important minerals. Enriches the water with: Calcium magnesium potassium sodium Additionally: improves the taste Stabilizes the water composition Change interval: 6-12 months (depending on the quality of the tap water, e.g. water hardness)Important! The service life of the filter depends on the quality of the source water and the intensity of use. More frequent replacement may be necessary if the load is higher. Failure to replace the filter in good time can impair its performance and cause damage to the membrane. Use with hot water (>38°C) is not permitted as this can damage the structure of the membrane and the activated carbon. Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (SR) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

SR remineralization replacement filter for BEM Lina and BEM Ida water filters - third purification stage SR remineralization filter - final filtration stage for BEM Lina / Ida water filters. Installed after the reverse osmosis membrane for additional water treatment. Features: Used in the final filtration stage to remineralize the water and improve the taste. Restores the taste and natural balance of the water after deep purification. Contains a mineral blend that enriches the water with calcium, magnesium, potassium, sodium, zinc, strontium and other elements. Ensures a soft and balanced mineralization at a level of about 30-60 ppm. Ø 6.8 x 29.2 cm Weight: 0.48 kg Replacement interval: Replace the filter cartridge every 6-12 months (depending on the water quality)Important! The after-filter does not clean the water of impurities - it only affects the taste. If worn, it does not protect against odors. The service life depends on the quality of the initial water and the consumption volume. A delayed filter change can lead to a deterioration in the taste of the water. Recommendations for filter change according to TDS value: TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (CF/SR) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de