Replacement filter RO for water filter BEM Luna

BEM LUNA set of 3 replacement filters (RO, PAC and CF) for BEM Luna water filter system 1. replacement filter for BEM Luna PAC water filter Features: Foldable combined polypropylene/cotton rod with activated carbon Removal of impurities such as sludge, rust, sand, suspended solids Removal of residual chlorine and absorption of unpleasant tastes and odors Replacement interval: Recommended filter cartridge replacement after 6 to 12 months (depending on the quality of the tap water, e.g. water hardness)2. replacement filter for BEM Luna CF water filter Features: Composite carbon rod serves to improve the taste, enrichment with valuable minerals! Replacement interval: Recommended filter cartridge change after 6 to 12 months (depending on the quality of the tap water, e.g. water hardness)3. replacement filter for BEM Luna RO water filter Features: Reverse osmosis filter element. Filtration fineness: 0.0001 micrometers Removal of deposits and heavy metals Replacement interval: Possible filter cartridge replacement after 12 to 24 months (depending on the quality of the tap water, e.g. water hardness)

CF replacement filter for BEM Lina and BEM Ida water filters - third purification stage Final purification based on pressed activated carbon without mineral fillers. Improves the taste of the water, removes residual odours and stabilizes the quality of the drinking water after the membrane. Properties: Contains no mineral additives and no mineralizing components. Used to purify water after the reverse osmosis membrane. Improves the taste of the water, removes residual odors and foreign tastes. Stabilizes the quality of drinking water after depth filtration and makes the taste softer and more neutral. Ø 6.8 x 29.2 cm Weight: 0.48 kg Replacement interval: Replace the filter cartridge every 6-12 months (depending on the water quality) Please note: Instead of the standard carbon after-filter, an SR remineralization filter (item no. 70200605) can be installed in the system. It performs the same post-cleaning functions, but additionally enriches the water with 18 natural minerals (calcium, magnesium, potassium, etc.) and thus ensures a soft and balanced composition.Important! The post-filter does not clean the water of impurities - it only affects the taste. If worn, it does not protect against odors. The service life depends on the quality of the initial water and the consumption volume. A delayed filter change can lead to a deterioration in the taste of the water. Recommendations for filter change according to TDS value: TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (CF/SR) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Complete replacement filter (all-in-one) for the BEM Robin / BEM Lora RO filter system Multi-stage cartridge that combines all water purification stages in one housing. Consists of a multi-layer filter system: Polypropylene sediment layer granulated activated carbon carbon block (carbon block) reverse osmosis membrane Final carbon post-filter Ensures complete water purification: Removes mechanical impurities: Sand, rust, suspended solids Reduces the content of chlorine and its compounds Eliminates unpleasant odors and flavors in the water Retains organic compounds and decomposition products Protects the membrane from premature fouling and wear Ensures deep purification through reverse osmosis (up to 99% of dissolved substances) Removes hardness salts, heavy metals and dissolved impurities (TDS) Reduces the total content of dissolved substances (ppm) in the water Ensures a stable quality of the purified water Improves the taste of the water in the final filtration stage Replacement interval: Recommendation to replace the filter element every 12-24 months (depending on the quality of the tap water and the intensity of use) Important! The service life of the cartridge depends on the quality of the source water and the consumption volume. As the cartridge combines several purification stages, its wear affects all filtration stages simultaneously. Delayed replacement can lead to a deterioration in water quality and a reduction in appliance performance. It is forbidden to use the filter with hot water (>38°C) as this destroys the structure of the membrane and the activated carbon. Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality Service life 0-150 Soft 24 months 150-300 medium hard 18-24 months 300-500 hard 12-18 months 500+ very hard 6-12 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Composite pre-filter (PCB) for BEM Orion Multi-stage filter for the pre-treatment of tap water and to protect the reverse osmosis system. Combines mechanical filtration with activated carbon for effective water treatment upstream of the RO membrane. Functions and benefits: Reduces mechanical impurities (sand, rust, suspended solids) Reduces the residual chlorine content Improves the taste and odor of the water Relieves the RO membranes and extends their service life Filter structure: The filter is designed as a composite cartridge and consists of a layer of polypropylene fibers (PP) for mechanical filtration an activated carbon block for the adsorption of chlorine and organic compounds Performance and service life: Filter capacity: up to 2400 liters Recommended replacement: every 6-12 months The specified values are guide values and apply under optimum conditions. The actual service life depends on the quality of the tap water, the mineral content, the contamination load and the frequency of use. With an average degree of mineralization of the tap water (approx. 250-300 ppm), it is recommended to adhere to the usual replacement intervals Instructions for use: Before first use, the filter should be rinsed according to the instructions. Regular replacement is necessary to ensure the performance of the system and a consistently high water quality. Filter change: The filter can be changed without tools and in just a few steps. Recommended: Shut off the water supply Depressurize the system Disconnect the appliance from the power supply Replace the filter After installation, the system should be flushed until the water quality has stabilized. Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality 1st stage (PCB) 2-3rd stage (RO) 0-150 Soft 12 months 24-36 months 150-300 medium hard 8-10 months 12-24 months 300-500 hard 6-8 months 12-18 months 500+ very hard 3-6 months 8-12 months The specified lifetimes are approximate values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters may be shortened even with a relatively low usage volume. Important notes The filter must not be removed during operation. Failure to comply with the recommended replacement intervals can lead to reduced filter performance or malfunctions. Damage caused by improper use or disregard of the instructions may be excluded from the warranty. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Inline cartridge mineralization filter 10 x 2" inch / quick coupling 1/4" Post-filter for mineralization of drinking water and pH value regulation 2" inch / quick coupling 1/4". The mineral inline mineralization cartridge is filled with high-quality minerals: Ca 19.2 mg/l Mg 12.6 mg/l Na 3.8 mg/l K 4.7 mg/l CJ 19.2 mg/l HCO3 12.6 mg/l SO4 3.8 mg/l Cl 4.7 mg/l With this cartridge as a post-filter, elements can be added back to the water in a controlled manner which were previously removed by the reverse osmosis process. Vital minerals such as iron, zinc, magnesium, selenium as well as calcium, magnesium, selenium and calcium are added to the osmosis water via bioceramic balls, magnesium, selenium as well as calcium, sodium or potassium and other trace elements are dissolved in the osmosis water. The ORP value (redox value) is reduced to up to -100mV and the pH value is increased by up to increased by up to 2 pH units. This mineralization improves the taste of the water of the water is improved and the pH value is stabilized. GPSR-Informationen Verantwortliche PersonFirma: BEM GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

PAC replacement filter for BEM Lina and BEM Ida water filters - First cleaning stage Features: Foldable combined polypropylene/cotton cartridge with activated carbon Removal of impurities such as sediment, rust, sand, suspended particles Reduces chlorine content, eliminates odors and foreign tastes. Replacement interval: Replace the filter cartridge every 6-12 months (depending on the water quality)Important! The service life depends on the quality of the tap water and the consumption volume. Delayed replacement can lead to a reduction in the efficiency of the entire system and damage to the membrane. The use of filters with hot water (>38°C) is prohibited, as this destroys the structure of the membrane and the activated carbon Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (CF/SR) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Replacement filter C2 for BEM Akira Post-carbon filter (C2): Neutralizes flavours - improves the taste of the water and absorbs the abnormal color and odour in the water. Operating conditions: Flow rate: 3L / min Working pressure: 0.1-0.4MPa Temperature: 33-100°C F (4-38°C) Max purified water capacity: 3600L for about 6-12 months PH range: 5-10 Suggest using water: TDS below 350ppm Ø approx. 63 mm, length approx. 274 mm Notes: Do not use with water that is mocrobiologically unsafe or of unknow quality without adequate disinfection before or after the system Filter could not use in hot water abover 38°C Replace the filter for every 6-12 months GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Replacement filter for BEM LUNA CF water filter Features: Composite - carbon rod Serves to improve the taste Enrichment with valuable minerals! Replacement interval: Recommended filter cartridge replacement after 6 to 12 months (depending on the quality of the tap water, e.g. water hardness) GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Replacement filter for BEM LUNA PAC water filter Features: Foldable combined polypropylene/cotton rod with activated carbon Removal of impurities such as sludge, rust, sand, suspended particles Removal of residual chlorine and absorption of unpleasant tastes and odors Replacement interval: Recommended filter cartridge replacement after 6 to 12 months (depending on the quality of the tap water, e.g. water hardness) GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Replacement filter for BEM Tornado hydrogen jug 1500 ml Replaceable filter element for dechlorination, pH correction and mineralization of the water. Used as a water preparation stage before the electrolysis process. Main functions and benefits: Neutralization of chlorine: Calcium sulphite removes up to 99.9% of residual chlorine and prevents chemical damage to the electrodes. Optimization of the pH value: Stabilizes the pH value in the range of 7.0-8.5 (weak alkaline environment). Mineralization: Enriches the water with ions of potassium (K), sodium (Na), calcium (Ca) and magnesium (Mg) using the natural mineral Maifan. Safety: Free from Bisphenol-A (BPA-free) and heavy metals, does not cause secondary pollution. Balanced mineral composition: The cartridge consists of natural silicate minerals in optimal proportions: Silicon dioxide - 60 % Aluminum oxide - 15 Iron oxide - 10 Calcium oxide - 5 Sodium oxide - 5 % Other - 5 % Properties: Suitable for: BEM Tornado 1500 ml (Art. 70200787) Temperature range: 4-38°C Intended use: For drinking water only Storage: Store in a dry, cool place until installation Dimensions (Ø x H): 112 x 45 mm Weight: 200 g Average replacement interval: 3-4 months (depending on the intensity of use and the degree of mineralization of the source water) GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Replacement PAC filter for BEM Akira Sediment and pre-carbon filter (PAC): The sediment filter serves as a pre-filter and protects the membrane - filters coarse impurities such as dust, sediment, rust, sand, suspended solids and residual chlorine; Pre-carbon filter - absorbs unpleasant odors and color, removes residual chlorine and organic substances from the water. Operating conditions: Flow rate: 3L / min Working pressure: 0.1-0.4MPa Temperature: 33-100°C F (4-38°C) Max purified water capacity: 3600L for about 6-12 months PH range: 5-10 We recommend the use of water: TDS below 350ppm Ø app. 63 mm, length app. 274 mm Notes: Do not use with water that is microbiologically unsafe or of unknown quality without proper disinfection before or after the system. The filter cannot be used in hot water above 38°C. Replace the filter every 6-12 months GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

PAC replacement filter for BEM Unicora water filter Combined cartridge for pre-cleaning the water. Consists of polypropylene fiber and activated carbon. Ensures mechanical and sorptive cleaning in the first filtration stage. Removes impurities: Sand, rust, suspended solids and other mechanical impurities residual chlorine and its compounds Unpleasant odors and flavors organic compounds and pesticide residues colorants Operating temperature 5-38°C Size: Ø 66.5 x 272 mm Replacement interval: Recommendation to replace the filter element every 6-12 months (depending on the quality of the tap water and the intensity of use) Indications for replacement: Reduced water pressure Appearance of odor or taste Visible soiling of the cartridge Exceeding the recommended service life Important! The service life depends on the quality of the initial water and the consumption volume. Delayed replacement reduces the cleaning efficiency and increases the load on the subsequent filtration stages. The use of filters with hot water (>38°C) is prohibited, as this destroys the structure of the membrane and the activated carbon. Recommendations for filter replacement according to TDS value TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 0-150 Soft 12 months 12-24 months 150-300 medium hard 8-10 months 12-18 months 300-500 hard 6-8 months 12 months 500+ very hard 3-6 months 8-12 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Replacement filter for BEM Unicora water filter - SINGLE (RO) Filter size: Ø 66.5 x 272mm Properties: Removes up to 99.9% of bacteria, heavy metals, viruses and dissolved substances Filter grade: 0.0001 micron Flow rate: 100 GPD (gallons per day) Replacement range - tap water Operating temperature 5-38°C Service life 12-24 months (depending on water quality and consumption) GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Replacement filter Unicora RO+C - Reverse osmosis composite filter (RO membrane + post-activated carbon) The Unicora RO+C composite filter combines a high-precision RO membrane with an integrated post-activated carbon filter and thus ensures particularly thorough water purification. The ultra-fine membrane with a filtration fineness of 0.0001 microns removes up to 99.9% of bacteria, viruses, heavy metals and dissolved substances from tap water and delivers reliable purity performance for your home. The built-in post-activated carbon filter neutralizes odours, reduces unwanted flavours and gives the water a pleasantly clear, fresh taste. The flow rate of 100 GPD ensures stable water production with efficient operation. An antibacterial protective net, which is integrated directly into the membrane winding process, increases hygienic safety and extends the service life of the filter. Features: Filter fineness (RO membrane): 0.0001 micron RO function: Removes up to 99.9% of bacteria, heavy metals, viruses and dissolved substances Integrated post-activated carbon filter: Reduces odors and improves the taste of the water Flow rate: 100 GPD Antibacterial protective mesh added during membrane winding Area of application: Tap water Operating temperature: 5-38 °C Service life: 6-12 months The values depend on the water quality and consumption. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Reverse osmosis membrane (RO) for the BEM Orion water filter Central filter element of the system for the deep treatment of tap water and to ensure consistently high drinking water quality. Functions and benefits: Significantly reduces the content of dissolved substances (TDS) Reduces the concentration of heavy metals (including lead) Reduces hardness constituents (salts) in the water Removes unwanted dissolved compounds Ensures stable and consistent water quality Filtration technology: The filter is based on reverse osmosis technology: Water is forced under pressure through a semi-permeable membrane, effectively separating purified water from dissolved substances and impurities. Performance and service life: Recommended replacement: every 12-24 months Under optimum operating conditions: up to 36 months ! The actual service life depends on the quality of the tap water, the mineral content, the pressure and the intensity of use. With an average degree of mineralization of the tap water (approx. 250-300 ppm), it is recommended to adhere to the usual replacement intervals. Instructions for use: Before first use, the filter should be rinsed according to the instructions. Timely replacement is necessary to ensure filter performance and constant water quality. Filter change: The filter can be changed without tools and requires no special expertise. Recommended: Shut off the water supply Depressurize the system Disconnect the appliance from the power supply Replace the filter After installation, the system should be flushed until the water quality has stabilized. Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality 1st stage (PCB) 2-3rd stage (RO) 0-150 Soft 12 months 24-36 months 150-300 medium hard 8-10 months 12-24 months 300-500 hard 6-8 months 12-18 months 500+ very hard 3-6 months 8-12 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. Important notes: The filter must not be removed during operation. Failure to observe the recommendations may result in reduced filter performance or malfunctions. Damage caused by improper use or failure to observe the operating conditions may be excluded from the warranty. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Reverse osmosis replacement filter RO for BEM Akira Membrane cartridge for reverse osmosis for deep water purification. Is the main filtration element in the system and ensures fine purification at molecular level. Degree of filtration: up to 0.0001 μm Capacity: up to 1.5 l/min (≈ up to 378 l/day) Reduces the total dissolved solids content (ppm) and contributes to a more stable quality of drinking water Removes / reduces the content of: up to 99 % of dissolved substances (TDS, depending on the quality of the source water) Hardness salts heavy metals Bacteria and viruses (effectiveness depends on operating conditions) Organic and inorganic impurities Size: Ø ~109 mm x 286 mm Operating temperature: 4-38°C Operating pressure: 0.4-0.8 MPa Replacement interval: Replace the filter cartridge every 12-24 months(depending on the water quality) Indications for replacement: Increase in the TDS value in the purified water Deterioration in the taste of the water Reduction in system performance Exceeding the recommended service life Important! The service life of the membrane depends on the quality of the source water and the condition of the pre-filter. Delayed replacement can lead to a reduction in filtration efficiency and a deterioration in drinking water quality. The use of filters with hot water (>38°C) is prohibited, as this destroys the structure of the membrane and the activated carbon. Recommendations for filter replacement according to TDS value TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (C2) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

RO replacement filter for BEM Lina and BEM Ida water filters - second purification stage Features: Main element of reverse osmosis filtration. Ensures deep purification of the water at molecular level. The membrane with a pore size of 0.0001 μm retains up to 99 % of dissolved substances. Removes hardness salts, heavy metals, bacteria, impurities and dissolved substances (TDS). Replacement interval: Replace the filter cartridge every 12-24 months (depending on the water quality) Important! The service life of the cartridges depends on the quality of the source water and the volume used. Delayed replacement of the pre-filter (1st stage, PAC) can impair the function of the reverse osmosis membrane (RO). Ignoring the membrane change can lead to impurities entering the drinking water and to a reduction in the efficiency and functionality of the appliance. Recommendations for filter change according to TDS value:         TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (CF/SR) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Set of 3 replacement filters (RO+PAC+CF) for BEM LINA and IDA water filters Complete set of three filter elements for multi-stage water treatment: pre-filtration, deep cleaning and final taste improvement. 1st stage - PAC (pre-filter): Combined filter made of polypropylene/cotton and activated carbon. Removes / reduces: Sand, rust and deposits mechanical and suspended particles residual chlorine Unpleasant odors and flavors Change interval: 6-12 months (depending on the quality of the tap water, e.g. water hardness) 2nd stage - RO (reverse osmosis): Membrane filter for deep water purification. Enables filtration at molecular level. Filtration fineness: up to 0.0001 µm Removes / reduces: dissolved substances (TDS) Hardness salts heavy metals Organic and inorganic impurities Replacement interval: up to 12 months (depending on the quality of the tap water, e.g. water hardness) 3rd stage - CF (secondary filter): Activated carbon filter for final water treatment: improves taste and odor removes residual substances remaining after the membrane Replacement interval: 6-12 months (depending on the quality of the tap water, e.g. water hardness)Important! The service life of the filter depends on the quality of the source water and the intensity of use. More frequent replacement may be necessary if the load is higher. Failure to replace the filter in good time can impair its performance and cause damage to the membrane. Use with hot water (>38°C) is not permitted as this can damage the structure of the membrane and the activated carbon. Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (CF) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

Set of 3 replacement filters (RO+PAC+SR) for BEM LINA and IDA water filters Complete set of three filter elements for multi-stage water treatment: pre-filtration, deep cleaning and final taste improvement. 1st stage - PAC (pre-filter): Combined filter made of polypropylene/cotton and activated carbon. Removes / reduces: Sand, rust and deposits mechanical and suspended particles residual chlorine Unpleasant odors and flavors Change interval: 6-12 months (depending on the quality of the tap water, e.g. water hardness) 2nd stage - RO (reverse osmosis): Membrane filter for deep water purification. Enables filtration at molecular level. Filtration fineness: up to 0.0001 µm Removes / reduces: dissolved substances (TDS) Hardness salts heavy metals Organic and inorganic impurities Change interval: up to 12 months (depending on the quality of the tap water, e.g. water hardness) 3rd stage - SR (remineralization): Post-filter with remineralization function. Improves the taste of the water and enriches it with important minerals. Enriches the water with: Calcium magnesium potassium sodium Additionally: improves the taste Stabilizes the water composition Change interval: 6-12 months (depending on the quality of the tap water, e.g. water hardness)Important! The service life of the filter depends on the quality of the source water and the intensity of use. More frequent replacement may be necessary if the load is higher. Failure to replace the filter in good time can impair its performance and cause damage to the membrane. Use with hot water (>38°C) is not permitted as this can damage the structure of the membrane and the activated carbon. Recommendations for filter replacement according to TDS value: TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (SR) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

SET: Sediment filter - pre-filter against sand and dirt, M6 PP filter for water filter with water connection + 2x quick coupling elbow for hose, 1/4 inch on both sides Sediment filter is used to remove mechanical impurities and to protect the filter system. Advantages: reduce the risk of clogging internal valves and connections reduce the load on the pump and other components of the device help to avoid functional deviations in the system contribute to a more stable water supply reduce the likelihood of premature wear of internal components Removes / reduces the content of: Sand rust Sludge and deposits mechanical impurities suspended solids Is installed between the tap and the filter device and pre-cleans the incoming water. Suitable for various household water treatment systems: Capacity: up to 3 l/min Capacity: up to 6 months Size: ~26 × 7 × 7 cm Operating temperature: 4-38°C Maximum pressure: up to 0.4 MPa pH range: 5-10 Signs for replacement: Reduced water pressure Visible soiling of the filter Deterioration of the water quality Expiry of the service life Important! Only suitable for cold water. The service life depends on the quality of the source water and the intensity of use. Replacement every 6 months is recommended for stable operation of the filter system Filter change recommendations according to TDS value:     TDS value (ppm) Water quality Service life 0-150 Soft 6 months 150-300 medium hard 4-6 months 300-500 hard 3-4 months 500+ very hard 1-3 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filter may be shortened even with a relatively low usage volume. Scope of delivery: 1 x sediment filter against sand and dirt, M6 PP filter 2 x 1/4" connections with quick connector GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de

SR remineralization replacement filter for BEM Lina and BEM Ida water filters - third purification stage SR remineralization filter - final filtration stage for BEM Lina / Ida water filters. Installed after the reverse osmosis membrane for additional water treatment. Features: Used in the final filtration stage to remineralize the water and improve the taste. Restores the taste and natural balance of the water after deep purification. Contains a mineral blend that enriches the water with calcium, magnesium, potassium, sodium, zinc, strontium and other elements. Ensures a soft and balanced mineralization at a level of about 30-60 ppm. Ø 6.8 x 29.2 cm Weight: 0.48 kg Replacement interval: Replace the filter cartridge every 6-12 months (depending on the water quality)Important! The after-filter does not clean the water of impurities - it only affects the taste. If worn, it does not protect against odors. The service life depends on the quality of the initial water and the consumption volume. A delayed filter change can lead to a deterioration in the taste of the water. Recommendations for filter change according to TDS value: TDS value (ppm) Water quality 1st stage (PAC) 2nd stage (RO) 3rd stage (CF/SR) 0-150 Soft 12 months 24 months 12 months 150-300 medium hard 9-12 months 18-24 months 9-12 months 300-500 hard 6-9 months 12-18 months 6-9 months 500+ very hard 4-6 months 12 months 4-6 months The specified lifetimes are guide values and are based on average water consumption (approx. 10-20 liters per day) and the quality of the source water. With an increased TDS value and a higher degree of contamination, the service life of the filters can be shortened even with a relatively low usage volume. GPSR-Informationen Verantwortliche PersonFirma: Bem GmbHLand: DeutschlandStadt: LöhneStraße: Oeynhausener Str. 54Postleitzahl: 32584E-Mail: post@bemshop.de